Skip to main content

IFFM&AFM2011

Prof Jin-Hyo Boo

Page 2 of 2

  1. Lead-free bismuth sodium titanate zirconate (Bi0.5Na0.5Ti1-xZrxO3 where x = 0.20, 0.35, 0.40, 0.45, 0.60, and 0.80 mole fraction) [BNTZ] ceramics were successfully prepared using the conventional mixed-oxide meth...

    Authors: Ampika Rachakom, Panupong Jaiban, Sukanda Jiansirisomboon and Anucha Watcharapasorn
    Citation: Nanoscale Research Letters 2012 7:57
  2. Three different carbon-based counter electrodes are investigated in light of catalytic activities such as electrochemical frequencies and interface impedances. We fabricated carbon-based counter electrodes of ...

    Authors: Hyunkook Kim, Hyonkwang Choi, Sookhyun Hwang, Youngjoo Kim and Minhyon Jeon
    Citation: Nanoscale Research Letters 2012 7:53
  3. TiNi shape memory alloy thin films were deposited using the pulsed laser deposition under vacuum and in an ambient Ar gas. Our main purpose is to investigate the influences of ambient Ar gas on the composition...

    Authors: Jeong Ok Cha, Tae Hyun Nam, Mohammad Alghusun and Jeung Sun Ahn
    Citation: Nanoscale Research Letters 2012 7:37
  4. MnO2/carbon nanotube [CNT] nanocomposites with a CNT core/porous MnO2 sheath hierarchy architecture are synthesized by a simple hydrothermal treatment. X-ray diffraction and Raman spectroscopy analyses reveal tha...

    Authors: Hui Xia, Yu Wang, Jianyi Lin and Li Lu
    Citation: Nanoscale Research Letters 2012 7:33
  5. In this paper, we describe a method of amorphous silicon carbide film formation for a solar cell passivation layer. The film was deposited on p-type silicon (100) and glass substrates by an RF magnetron co-spu...

    Authors: Yeun-Ho Joung, Hyun Il Kang, Jung Hyun Kim, Hae-Seok Lee, Jaehyung Lee and Won Seok Choi
    Citation: Nanoscale Research Letters 2012 7:22
  6. A patterned film (electrode) with lozenge-shaped Si tiles could be successfully fabricated by masking with an expanded metal foil during film deposition. Its electrochemical properties and structural stability...

    Authors: Gyu-bong Cho, Jung-pil Noh, Ho-jin Sung, Sang-hun Lee, Yeon-min Im, Hyo-jun Ahn and Ki-won Kim
    Citation: Nanoscale Research Letters 2012 7:20
  7. Lead-free 0.98(Na0.5K0.5)NbO3-0.02Ba(Zr0.52Ti0.48)O3 [0.98NKN-0.02BZT] ceramics were fabricated by the conventional mixed oxide method with sintering temperature at 1,080°C to 1,120°C. The results indicate that t...

    Authors: Seung-Hwan Lee, Sung-Gap Lee and Young-Hie Lee
    Citation: Nanoscale Research Letters 2012 7:15
  8. The low-temperature catalytic ozone oxidation of benzene was investigated. In this study, Al-SBA-16 (Si/Al = 20) that has a three-dimensional cubic Im3m structure and a high specific surface area was used for ...

    Authors: Jong Hwa Park, Ji Man Kim, Mingshi Jin, Jong-Ki Jeon, Seung-Soo Kim, Sung Hoon Park, Sang Chai Kim and Young-Kwon Park
    Citation: Nanoscale Research Letters 2012 7:14
  9. The quality of the refractories applied on integrated gasification combined cycle should be a key factor that affects both the reliability and the economics of gasifier operation. To enhance the workability of...

    Authors: Jingming Zhao, Taesuk Kim, Gichul Kim, Kyuhong Hwang and Dongsik Bae
    Citation: Nanoscale Research Letters 2012 7:8
  10. Dynamic drop test for studying the temporal lowering of hydrophobicity on the surface of silicone rubber with direct current voltage application was carried out. In this study, we evaluated the influence of th...

    Authors: Yuya Seo, Norihito Oshikawa, Takuma Miyake, Tatsuya Sakoda and Tomikazu Anjiki
    Citation: Nanoscale Research Letters 2012 7:4
  11. A novel and simple approach was used to disperse Cu nanoparticles uniformly in the Bi0.5Sb1.5Te3 matrix, and the thermoelectric properties were evaluated for the Cu-dispersed Bi0.5Sb1.5Te3. Polycrystalline Bi0.5S...

    Authors: Il-Ho Kim, Soon-Mok Choi, Won-Seon Seo and Dong-Ik Cheong
    Citation: Nanoscale Research Letters 2012 7:2